Services

The range extender setup is a solution for all network issues like slow web connection, weak wireless signals, connectivity issues, dead zones so forth. At the point when you buy a brand new wireless extender, it accompanies a extender’s manual. This manual has each data about the specific model of the product, default login details, and setup.

In this article, we will show you the step by step guidelines to set up your wireless extender utilizing mywifiext.net web-based interface.

  1. First of all, ensure that the power LED of your Wi-Fi extender is solid green before starting the setup procedure.
  2. Open any of your web browsers on your computer like Opera, Safari, Microsoft Edge or Google chrome.
  3. Type http://mywifiext.net in the URL bar of your preferred browser and press Enter. You can likewise use the IP address to access the setup page.
  4. Next, the extender will take a few seconds to scan all the wireless networks available in your home including your main router’s wireless network.
  5. From the list of all available wireless networks, choose your router’s Wi-Fi name and type password to connect it from the range extender.
  6. Click on ‘Next’ button to review all the settings like SSID and password made by you.
  7. Next, create an SSID and the password for your extender’s network.
  8. Click save button to save all the settings for your wireless extender and wait for the setup process to complete.
  9. Unplug your extender and choose the best spot to place your extender so, you can get the strong wireless signals throughout your home or office.

New Extender Setup

As per reviews, The extender setup is essential for those individuals who would prefer not to encounter any issue with their wireless devices. These are two modes in which an extender can be set up i.e Access Point Mode or Extender Mode. In whichever mode you need to set up your extender, you need to get to
mywifiext.net setup page. That must be gotten to simply after setup success.

Prerequisites for a New Extender Setup

Before the setup, you should have the following requirements done:

  • Your main router’s wireless network should be up and running.
  • Note down the wireless name and the password on a paper.
  • The range extender must be connected to an AC electrical outlet for power supply.
  • Wait till the time the light starts blinking green or white before initiating the setup process.
New Extender Setup

Wi-Fi Extender Setup Using Mywifiext.net

The Extender Setup is done through the http://mywifiext.net web-based setup portal. You don’t require any installation CD or software, Just execute these steps:

  1. Use a PC or Laptop and connect the cable from the wireless repeater to the computer
  2. Now, go to a web program and open http://mywifiext.net or 192.168.1.250.
  3. This web address will take you to the mywifiext.net setup page. Enter the default login details to enter the setup portal.                                                        Default Username – Admin           Default Password – Admin
  4. Next, the setup portal will scan the wireless networks in your area. Choose your wireless network of the existing router from the list.
  5. Select your 5G network also in case you’re using a dual band router. Enter the password for both 2.4G and 5G networks and click next.
  6. Next, you’ll need to enter the repeater’s SSID and password. The password should be a minimum of eight characters or numbers.
  7. Complete the configuration steps by following the on-screen instructions.
  8. Click on ‘save’ and you’re all set with your extender setup.
  9. Choose the best spot for your wireless repeater so you will be able to get wireless signals around every corner of your home.

Dual-Band Extender Features

A Dual-Band Extender is a network device designed to improve the coverage and signal strength of a wireless network by boosting the existing Wi-Fi signal.

Dual Band

Utilizing both 2.4 and 5GHz bands, you can adjust network traffic to the better online gaming experience and watch your favorite web series.

Best Range

The range is extended to the most outrageous. With 4dBi antennas and 300mW enhancers, dead-spots and hard to land at dead spots of your house are secured dependably.

WPA2 Encryption

With WPA2 encryption assures that hackers can’t enter your private network and take your valuable data. WPA and WEP are additionally supported when your devices don’t support WPA2 encryption.

Seamless Connectivity
Seamless Connectivity

Enhance your internet experience with a Dual-Band Extender that offers reliable coverage across both 2.4 GHz and 5 GHz frequencies. This device ensures your Wi-Fi signal reaches every corner of your home or office.

How To Setup an old Extender?

An old extender can be installed from virtually any device through the web setup portal with mywifiext.net web address and with the WPS button.

  • Turn on the extender and wait until the LED lights get stable.
  • Connect your computer to extender's network. In the URL bar of web browser, type http://mywifiext.net and press enter key.
  • The web-based portal will scan the nearby wireless networks. Choose the wireless network name that you wish to extend.
  • After creating the SSID and password, setup your extender utilizing further on-screen instructions.

How Do I Access the Wi-Fi Extender?

After the successful extender setup, you may need to get to extender settings after the setup to deal with the settings. Here are the steps to get to the web-based portal of your configured extender.

  • Connect it to the extender’s network via Ethernet cable or wirelessly.
  • Open a preferred web browser, enter www.mywifiext.net net web address in the URL bar and hit the enter key.
  • Now, you will have to enter the username and password in the prompted window. Once you’re done, click on ‘Login’
  • Now, you’re on the mywifiext.local login page. Alter any desired settings and tap on ‘Save’ button.
Scroll to Top